Angled Deck
For those facing height access issues in tight or awkward spaces, the Angled Deck could be your solution. Park your G20 parallel to your work project and walk straight out at 90 degrees from the main deck. The Angled Deck work platform has a 150kg capacity, includes an end gate and can be assembled to either the right or left side of your G20.
Benefits
Access in limited spaces
For work in tight or awkward spaces, park your G20 parallel to your work project and walk straight out at 90 degrees from the main deck.
Cantilever retained
Despite projecting directly out from the side of the G20, the Angled Deck still provides over 950mm of clear cantilever reach.
Minimal floor footprint
The Angled Deck does not impact the G20’s minimal floor footprint.
Versatile access
Extension can be assembled on either left or right side of your G20 for your specific needs.
Use it with
For that vital extra lift, the 1 Step Extension accessory lifts the standard Giraffe G20 up 225mm in height.
This retrofittable Giraffe height extension accessory gives your standard G20 unit an extra 450mm in height, so you can own the higher ground on those extra large projects too.
The 4 Step Sub Chassis will grow your standard Giraffe G20 unit an extra 900mm in height, with all the great G20 features retained.
Reach those really big jobs! Complete with a compliant landing, the 8 Step Sub Chassis gives you the extra height you need when you have really big gear to look after, lifting the standard Giraffe G20 up 1800mm.
Specifications
See it in action
Giraffe | Bill Nimon, Nimon and Sons Ltd, NZ
The VRS Giraffe system has saved us a lot of training, a lot of time and effort. It’s a simple solution to an expensive, long-term problem.
Testimonials